Power supply
6.4.1
Preliminary steps
"Locating the defective server" on page 45
Ê
"Locating the defective component" on page 47
Ê
Ê Check which power supply unit is defective.
A power supply unit is defective when the indicator (1) in
orange. For more information see section
page
358.
Ê Only when replacing a power supply unit in a non-redundant configuration:
"Shutting down the server" on page 48
Ê Remove the power cord from the defective power supply unit as described
in section
"Disconnecting the server from the mains" on page 49
6.4.2
Removing the defective power supply unit
Ê Remove the power supply unit as described in section
supply unit" on page
6.4.3
Installing the new power supply unit
Ê Install the power supply unit as described in section
supply unit" on page
6.4.4
Concluding steps
Ê Connect the power cord to the new power supply unit and secure it with a
cable tie as described in section
page
60.
Ê Only when replacing a power supply unit in a non-redundant configuration:
"Switching on the server" on page 61
"Performing a fan test after replacing a defective fan" on page 100
Ê
114
111.
107.
"Connecting the server to the mains" on
Upgrade and Maintenance Manual
figure 268
"Connectors and indicators" on
"Removing a power
"Installing a power
lights
RX2530 M1