Removing The Lsd Module - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY TX2540 M1:

Table of Contents

Ê Ensure that the four pins on the frame (see arrows) engage with the side

holes on the dummy insert.

Ê Insert the slimline ODD dummy module into the Multibay box and push back

until the locking tab engages as shown in

12.5.2.4 Removing the LSD module

Figure 232: Removing the 3.5-inch installation frame from the Multibay box (A)

Ê Remove two screws on either side of the Multibay box to disengage the 3.5-

inch installation bay.

Figure 233: Removing the 3.5-inch installation frame from the Multibay box (B)

Ê Slide the 3.5-inch installation frame out of the Multibay box as shown.

Upgrade and Maintenance Manual

Accessible drives and LSD

figure 221 on page