Removing The Defective Memory Module; Installing The New Memory Module; Concluding Steps - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

"Shutting down the server" on page 48
Ê
"Disconnecting the server from the mains" on page 48
Ê
"Getting access to the component" on page 49
Ê
Ê Locate the defective memory module using the onboard Local Diagnostic
LEDs as described in section
page 410.

10.4.2 Removing the defective memory module

Ê Remove the memory module as described in section
module" on page

10.4.3 Installing the new memory module

Ê Install the memory module as described in section
module" on page

10.4.4 Concluding steps

"Reassembling" on page 62
Ê
"Connecting the server to the mains" on page 72
Ê
"Updating or recovering the system board BIOS and iRMC" on page 85
Ê
applicable)
"Switching on the server" on page 73
Ê
"Enabling SVOM boot watchdog functionality" on page 96
Ê
"Enabling replaced components in the system BIOS" on page 96
Ê
"Verifying the memory mode" on page 97
Ê
"Enabling BitLocker functionality" on page 101
Ê
"Resetting the error status after replacing memory modules or processors"
Ê
on page 93
TX2540 M1
"Onboard indicators and controls" on
269.
267.
Upgrade and Maintenance Manual
Main memory
"Removing a memory
"Installing a memory
(if
271