Concluding Steps - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

Main memory
Figure 185: Installing memory modules (B)
Ê Align the notch on the bottom of the module with the crossbar in the slot.
Ê Press down on the memory module until the securing clips snap into the
cutouts at each end of the module.

10.2.3 Concluding steps

"Reassembling" on page 62
Ê
"Connecting the server to the mains" on page 72
Ê
"Updating or recovering the system board BIOS and iRMC" on page 85
Ê
applicable)
"Switching on the server" on page 73
Ê
"Enabling SVOM boot watchdog functionality" on page 96
Ê
"Verifying the memory mode" on page 97
Ê
"Enabling BitLocker functionality" on page 101
Ê
268 Upgrade and Maintenance Manual
(if applicable)
(if
TX2540 M1