14.3.3 Replacing the UFM
Upgrade and Repair Unit
(URU)
Tools: – Phillips PH1 / (+) No. 1 screw driver
– combination pliers and flat nose pliers
14.3.3.1 Preliminary steps
"Disabling or suspending BitLocker functionality" on page 77
Ê
"Disabling SVOM boot watchdog functionality" on page 78
Ê
"Locating the defective server" on page 45
Ê
"Shutting down the server" on page 48
Ê
"Disconnecting the server from the mains" on page 48
Ê
"Getting access to the component" on page 49
Ê
14.3.3.2 Removing the defective UFM
Ê Remove the UFM from the system board as described in section
the UFM" on page
Ê The UFM spacer remains on the system board.
TX2540 M1
347.
Upgrade and Maintenance Manual
System board and components
Hardware: 10 minutes
Software: 5 minutes
"Removing
349