Installing The Multibay Box; Concluding Steps - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

Accessible drives and LSD
Figure 234: Removing the LSD module from the 3.5-inch installation frame
Ê Press in on the locking latch (see close-up) to disengage the LSD module
(1).
Ê Pull the LSD module out of the 3.5-inch installation frame (2).
Ê If the removed LSD module is not to be replaced by a new module, reinstall
the LSD dummy cover.

12.5.2.5 Installing the Multibay box

Ê Install the Multibay box as described in section
on page 313.

12.5.2.6 Concluding steps

"Installing the system fan holder" on page 75
Ê
"Reassembling" on page 62
Ê
"Connecting the server to the mains" on page 72
Ê
"Switching on the server" on page 73
Ê
320 Upgrade and Maintenance Manual
"Installing the Multibay box"
TX2540 M1