Standard Power Supply; Replacing The Standard Power Supply Unit; Preliminary Steps; Removing The Defective Standard Power Supply Unit - Fujitsu PRIMERGY RX1330 M1 Upgrade And Maintenance Manual

6.2

Standard power supply

6.2.1

Replacing the standard power supply unit

Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
6.2.1.1

Preliminary steps

"Locating the defective server" on page 43
Ê
"Suspending BitLocker functionality" on page 63
Ê
"Shutting down the server" on page 45
Ê
"Disconnecting the server from the mains" on page 46
Ê
"Getting access to the component" on page 47
Ê
6.2.1.2

Removing the defective standard power supply unit

Figure 21: Disconnecting the power cables
Ê Disconnect the two power cables from the system board connectors "PC98"
and "PWR1".
RX1330 M1
Upgrade and Maintenance Manual
Power supply
Hardware: 10 minutes
93