Removing Memory Modules; Preliminary Steps; Removing A Memory Module - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

10.3

Removing memory modules

Upgrade and Repair Unit
(URU)
Tools: tool-less

10.3.1 Preliminary steps

"Disabling or suspending BitLocker functionality" on page 77
Ê
"Disabling SVOM boot watchdog functionality" on page 78
Ê
"Locating the defective server" on page 45
Ê
"Shutting down the server" on page 48
Ê
"Disconnecting the server from the mains" on page 48
Ê
"Getting access to the component" on page 49
Ê

10.3.2 Removing a memory module

Ê Identify the desired memory slot see section
page 264.
V
CAUTION!
Ensure to maintain an operational configuration when removing
memory modules. For additional information, please refer to section
"Basic information" on page
Figure 186: Removing memory modules (A)
Ê Eject the desired memory module by pressing out the securing clips at each
end of the memory slot.
TX2540 M1
264.
Upgrade and Maintenance Manual
Main memory
Hardware: 5 minutes
"Basic information" on
269