Voice Vlan Port Setting - NETGEAR GS748Tv4 Software Administration Manual
Smart switch
Hide thumbs
Also See for GS748Tv4:
- Installation manual (2 pages) ,
- Installationsanleitung (2 pages) ,
- Hardware installation manual (39 pages)
Table of Contents
Advertisement
5.
From the Voice VLAN Aging Time field, specify the amount of time after the last IP phone's
OUI is aged out for a specific port. The port will age out after the bridge and voice aging
time.
6.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
7.
If you make any changes to this page, click Apply to send the updated configuration to the
switch.
Voice VLAN Port Setting
To display the Voice VLAN Port Setting page, click Switching > Voice VLAN > Advanced >
Port Setting.
To configure Voice VLAN port settings:
1.
Select the check box next to the port to configure. You can select multiple check boxes
to apply the same setting to all selected ports.
2.
From the Voice VLAN Mode menu, specify whether to enable or disable Voice VLAN on the
selected port.
3.
From the Voice VLAN Security menu, specify whether to enable or disable Voice VLAN
security on the selected port.
4.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
5.
If you make any changes to this page, click Apply to send the updated configuration to the
switch.
90 |
Chapter 3: Configuring Switching Information
GS748T Smart Switch Software Administration Manual
Advertisement
Table of Contents
