Table of Contents
Advertisement
The following steps are required to remove the remaining wiring/components from the car.
Labeling each connection as you disconnect them will help you to recognize what you
need/don't need when you get to the wiring stage of your GTM build.
Trim Plate – IP Accessory
Flathead Screwdriver, T-15 Torx.
Shift into 2nd (Automatic) or 4th (Manual) for more clearance.
Pull boot in towards the shifter (M/T) to release the tabs. Lift away from the trim plate.
Remove ash tray. Remove grill plate using a flathead screw driver.
87
www.factoryfive.com
508-291-3443
Advertisement
Table of Contents
