Table of Contents
Advertisement
Cockpit – Door Sill Inside Panel Installation
1
/
" drill bit, drill, marker, silicone, caulking gun.
8
Aluminum Panel – Door Sill, Inside, Driver and Passenger Sides.
If you did not mark the location of the panel in relation to the frame and to the body when you received
your kit, make sure that the flange that sits on the aluminum floor pan sits flat, the top edge of the panel is
no more than approximately
than the section of the body that wraps over the 1.5" tube).
3
/
" above the 1.5" steel door sill tube (you don't want it to be any higher
16
www.factoryfive.com
579
508-291-3443
Advertisement
Table of Contents
