Battery Tray And Front/Center Undercarriage Aluminum - Factory Five Racing GTM Supercar Assembly Manual

Install the center splash panel. These have to be installed before the rear suspension because the upper
control arm mounts protrude through this panel. Rivet this panel into place using the above procedure
along the frame rails shown below.

Battery Tray and Front/Center Undercarriage Aluminum


Eye protection, drill,

Battery tray, Aluminum Panel – Undercarriage (Front, Center).
If you plan to use the optional Air Conditioning System, you will need to offset the battery to the Driver's
side so the hole on the left side of the battery tray is in line with the center of the "X". If you aren't using
the Air Conditioning system, follow Step 2.
3 / " drill bit, rivet tool, silicone, caulk gun,
16
www.factoryfive.com
3 /
16
215
508-291-3443
" rivets.