Axles And Cv Joints - Factory Five Racing GTM Supercar Assembly Manual

The last piece that has to be installed is the passenger tunnel wall (FFR# 25157). The hole in this panel is
for the e-brake handle to pass through. Position the e-brake handle in the "up/engaged" position while
installing this panel.

Axles and CV joints


Vise, dead-blow hammer/rubber mallet, pliers, 34mm socket, ratchet.

Axle Shafts (FFR# 25290), Inner CV Joint Boot (FFR# 25715), Outer CV Joint Boot (FFR#
25716), Speedometer Gear (FFR# 25149).
The outer CV joints need to be removed from the donor axle shafts. Put the axle shaft in a vice and pull
back or cut away the CV boot.
323
www.factoryfive.com 508-291-3443