Ignition
7, 10 mm, Flathead Screwdriver.
Ignition Module, wiring, Ignition key.
Unbolt the screw to the left of the Ignition (7 mm). Unbolt the 2 bolts connecting ignition to stereo
bracket (10 mm).
Automatic donors – Disconnect the park cable by inserting the key, turn the ignition to ON, and use a
screw driver to release the lock tab at the underside. Pull the cable connection out of the ignition.
Save the Ignition key – you won't need the ignition itself as there's an ignition switch supplied with
the kit, but you will need the Corvette key to open the doors.
98
www.factoryfive.com
508-291-3443