Ignition Switch - Factory Five Racing GTM Supercar Assembly Manual

Ignition Switch

Locate the bundle of heavy gauge wires that attach to the ignition switch in the chassis harness.
You can mount the ignition switch on the gauge face, on the center section of the dash etc. Although you
won't be permanently mounting the switch now, this is a good time to determine the location in case you
need to extend/shorten the wires before crimping the ring terminals on.
Once you determine the location you want to mount the ignition, you will have to drill a 1" hole with a
hole saw to mount the ignition (through the dash face, dash center/center cover plate). We recommend
mounting the ignition through the console cover plate/dash center section.
Crimp the supplied ring terminals onto the ignition wires in the chassis harness.
343
www.factoryfive.com 508-291-3443
Terminal Wire Color
Red
Battery
Red
Starter Solenoid Purple
Accessory Brown
Orange
Ignition
Pink