Table of Contents
Advertisement
Shifter Linkage
Hammer, hacksaw, 13mm, 9mm wrench, 3.5mm Hex key.
Shifter linkage and hardware, shifter handle assembly (FFR# 25832, 26085).
On some engines, the engine mount may interfere with the shifter linkage – you will have to grind
the engine mount slightly to allow the linkage to clear the mount if this condition exists.
The shifter linkage is easier assembled outside of the car and then installed as two completed assemblies.
The first step is to install the universal joint (found with the shifter linkage assembly) onto the rearward
linkage arm. This is installed using one of the supplied spring pins.
404
www.factoryfive.com
508-291-3443
Advertisement
Table of Contents
