Rear Wall - Factory Five Racing GTM Supercar Assembly Manual

Repeat for the Passenger Side.

Rear Wall


Masking tape, Super 77 Spray Adhesive, marker, scissors, Rivnut Kit, Rivnuts, ¼", 25/64" drill
bits, drill, Razor Knife/Razor Blade.

Interior Vinyl parts, Aluminum Panel – Rear Wall (FFR# 25194).

For the vinyl installation, work carefully and most importantly TAKE YOUR TIME! You do not
want to have wrinkles in the vinyl and you want to be sure that the vinyl is tightly adhered to the
bends in the aluminum.
Remove the rear wall vinyl from the box and lay it vinyl side down on top of something that it is ok to get
the spray adhesive on (box, newspaper etc).
Lay the rear wall aluminum panel on top of the vinyl so that the bend in the aluminum is up. Match the
profile of the vinyl to the profile of the aluminum so you have even amounts of overlap on each side.
560
www.factoryfive.com 508-291-3443