Fuel Tank Floor (R, L); Undercarriage - Floor Pan (R, L) - Factory Five Racing GTM Supercar Assembly Manual

Fuel Tank Floor (R, L)

Place one of the Fuel Tank Floor Panels onto the frame. It should contact the front edge of the Rear
Quarter Floor and the side of the Engine Floor. Measure in about ¼" from each edge of the panel and
mark the rivet locations. Remove the panel.
Apply a bead of silicone to the frame, then reposition the panel and drill and rivet it into place.
Repeat for the other side.
Undercarriage – Floor Pan (R, L)
Measure in about ¼" from the edges of the panel, mark the locations for the rivets, and then drill out the
panel.
603
www.factoryfive.com 508-291-3443