Table of Contents
Advertisement
Nose assembly, fog light components, headlight bucket assembly, headlights and hardware, front
turn signals and hardware, GTM nose aluminum (FFR# 25243, 25216, 2553, 25209, 25214,
25686, 25533 )
If you are going to make up your own pattern, do so out of paper/cardboard for one side and
simply flip template over for the second side.
Cut the radiator exit hood openings. These cutouts allow air to escape from under the body after it passes
through the radiator. Wind tunnel tests suggests that these cutouts are cut using the factory shape. Use a
reciprocating saw, cut 1" in from the recess in the hood.
Headlight and Turn Signal Mounting
The following pictures show the headlight bucket off the nose. The headlight bucket for the Gen 2
GTM is part of the nose. Use the pictures for reference only to mount the lights.
The low beam light is the outer light position of the headlight bucket and the high beam is located
in the inner position of the headlight assembly
513
www.factoryfive.com
508-291-3443
Advertisement
Table of Contents
