Buderus Logano G615 Installation And Service Instructions Manual page 54

13
System inspection and maintenance
Additional maintenance work as-needed
1. Shut down the heating system
2. Remove and clean heat exchanger baffles
3. Clean the flue gas passages (heating surfaces) and flue
gas baffles
4. Clean the combustion chamber
5. Clean the draft diverter
6. Insert the flue gas baffles
7. Check gaskets/sealant ropes on the burner and burner
door and replace if required
8. Commissioning the heating system
9. Record the final checks of the maintenance work, incl.
measurements and test results
10. Check safe and proper operation
Confirm professional inspection
Tab. 17 Maintenance log book
54
Page Date:____________
46
48
48
48
48
29
48
43
Company stamp/
signature
Logano G615 - Subject to technical modifications
Date:____________
Company stamp/
signature