Filtering Commands - 3Com 3CRWEASYA73 User Manual

C 6: C L
HAPTER OMMAND INE
Default
Command Mode
Example
Outdoor 11a Building to Building (config)#mac-authentication server remote
Outdoor 11a Building to Building (config)#
Related Commands
mac-authentication session-timeout
This command sets the interval at which associated clients will be
re-authenticated with the RADIUS server authentication database. Use the no
form to disable reauthentication.
Syntax
Default
Command Mode
Example
Outdoor 11a Building to Building (config)#mac-authentication
Outdoor 11a Building to Building (config)#

Filtering Commands

The commands described in this section are used to filter communications
between wireless clients, control access to the management interface from
wireless clients, and filter traffic using specific Ethernet protocol types.
I
NTERFACE
Disabled
Global Configuration
address filter entry (6-79)
radius-server address (6-66)
802.1x-supplicant user (6-76)
mac-authentication session-timeout <minutes>
minutes - Re-authentication interval. (Range: 0-1440)
0 (disabled)
Global Configuration
session-timeout 1
6-82