C
6: C
L
HAPTER
OMMAND
INE
antenna id
This command specifies the antenna type connected to the access point
represented by a four-digit hexadecimal ID number, either the integrated diversity
antennas (the "Default Antenna") or an optional external antenna.
Syntax
Default Setting
Command Mode
Command Usage
Example
Outdoor 11a Building to Building(if-wireless g)#antenna id 0000
Outdoor 11a Building to Building(if-wireless g)#
antenna location
This command selects the antenna mounting location for the radio interface.
Syntax
I
NTERFACE
antenna id <antenna-id>
• antenna-id - Specifies the ID number of an approved antenna that is
connected to the access point
(Range: 0x0000 - 0xFFFF)
0x0000 (built-in antennas)
Interface Configuration (Wireless)
• The optional external antennas (if any) that are certified for use with the
access point are listed by typing antenna control id ?. Selecting the
correct antenna ID ensures that the access point's radio transmissions are
within regulatory power limits for the country of operation.
• The antenna ID must be selected in conjunction with the antenna control
method to configure proper use of any of the antenna options.
antenna location <indoor | outdoor>
• indoor - The antenna is mounted indoors.
• outdoor - The antenna is mounted outdoors.
6-120