3Com 3CRWEASYA73 User Manual page 203

bridge-link parent
This command configures the MAC address of the parent bridge node.
Syntax
bridge-link parent <mac-address>
mac-address - The wireless MAC address of the parent bridge unit.
(12 hexadecimal digits in the form "xx-xx-xx-xx-xx-xx").
Default Setting
None
Command Mode
Interface Configuration (Wireless)
Command Usage
Every bridge (except the root bridge) in the wireless bridge network must
specify the MAC address of the parent bridge that is linked to the root
bridge, or the root bridge itself.
Example
Outdoor 11a Building to Building(if-wireless a)#bridge-link parent
00-08-2d-69-3a-51
Outdoor 11a Building to Building(if-wireless a)#
bridge-link child
This command configures the MAC addresses of child bridge nodes.
Syntax
bridge-link child <index> <mac-address>
• index - The link index number of the child node. (Range: 1 - 6)
• mac-address - The wireless MAC address of a child bridge unit.
(12 hexadecimal digits in the form "xx-xx-xx-xx-xx-xx").
6-91
Using the Command Line Interface