3Com 3CRWEASYA73 User Manual page 88

3com outdoor 11a building to building bridge and 11bg access point
Hide thumbs Also See for 3CRWEASYA73:
Table of Contents

Advertisement

C
5: S
C
HAPTER
YSTEM
ONFIGURATION
Description – Adds a comment or description to the wireless interface. (Range:
1-80 characters)
Turbo Mode – The normal 802.11a wireless operation mode provides connections
up to 54 Mbps. Turbo Mode is an enhanced mode (not regulated in IEEE 802.11a)
that provides a higher data rate of up to 108 Mbps. Enabling Turbo Mode allows
the access point to provide connections up to 108 Mbps. (Default: Disabled)
NOTE: In normal mode, the access point provides a channel bandwidth of 20
MHz, and supports the maximum number of channels permitted by local
regulations (e.g., 13 channels for the United States). In Turbo Mode, the channel
bandwidth is increased to 40 MHz to support the increased data rate. However,
this reduces the number of channels supported (e.g., 5 channels for the United
States).
NOTE: . Check your country's regulations to see if Turbo Mode is allowed.
Super Mode – The Atheros proprietary Super A performance enhancements are
supported by the access point. These enhancements include bursting,
compression, and fast frames. Maximum throughput ranges between 40 to 60
Mbps for connections to Atheros-compatible clients. (Default: Disabled)
Auto Channel Select – Enables the access point to automatically select an
unoccupied radio channel. (Default: Enabled)
NOTE: Check your country's regulations to see if Auto Channel can be disabled.
5-40

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wl-575

Table of Contents