C
6: C
L
HAPTER
OMMAND
INE
Example
Outdoor 11a Building to Building (if-wireless g: VAP[0])#auth shared-key
Outdoor 11a Building to Building (if-wireless g)#
Related Commands
encryption
This command enables data encryption for wireless communications. Use the no
form to disable data encryption.
Syntax
Default Setting
Command Mode
Command Usage
I
NTERFACE
WEP). To place the VAP into AES only mode, use "required" and then
select the "cipher-ccmp" option for the cipher-suite command.
encryption (6-142)
key (6-143)
[no] encryption
disabled
Interface Configuration (Wireless-VAP)
• Wired Equivalent Privacy (WEP) is implemented in this device to prevent
unauthorized access to your wireless network. For more secure data
transmissions, enable encryption with this command, and set at least one
static WEP key with the key command.
• The WEP settings must be the same on each client in your wireless
network.
• Note that WEP protects data transmitted between wireless nodes, but
does not protect any transmissions over your wired network or over the
Internet.
• You must enable data encryption in order to enable all types of encryption
(WEP, TKIP, and AES-CCMP) in the access point.
6-142