3Com 3CRWEASYA73 User Manual page 267

NOTE: When VLANs are enabled, the access point's Ethernet port drops all
received traffic that does not include a VLAN tag. To maintain network
connectivity to the access point and wireless clients, be sure that the access point
is connected to a device port on a wired network that supports IEEE 802.1Q VLAN
tags.
The VLAN commands supported by the access point are listed below.
Table 29 VLAN Commands
Command
vlan
management-
vlanid
vlan-id
Function
Enables a single VLAN for all traffic
Configures the management VLAN for the access point GC
Configures the default VLAN for the VAP interface
6-155
Using the Command Line Interface
Mode
GC
IC-W-VAP 6-157
Page
6-156
6-156