3Com 3CRWEASYA73 User Manual page 195

Table 21 Filtering Commands
Command
filter local-bridge
filter ap-manage
filter uplink enable
filter uplink
filter ethernet-type enable Checks the Ethernet type for all incoming and outgoing
filter ethernet-type
protocol
show filters
filter local-bridge
This command disables communication between wireless clients. Use the no form
to disable this filtering.
Syntax
filter local-bridge <all-VAP | intra-VAP>
no filter local-bridge
all-VAP - When enabled, clients cannot establish wireless communications
with any other client, either those associated to the same VAP interface or
any other VAP interface.
intra-VAP - When enabled, clients associated with a specific VAP
interface cannot establish wireless communications with each other.
Clients can communicate with clients associated to other VAP interfaces.
Function
Disables communication between wireless clients
Prevents wireless clients from accessing the
management interface
Ethernet port MAC address filtering
Adds or deletes a MAC address from the filtering table GC
Ethernet packets against the protocol filtering table
Sets a filter for a specific Ethernet type
Shows the filter configuration
6-83
Using the Command Line Interface
Mode
GC
GC
GC
GC
GC
Exec
Page
6-83
6-85
6-85
6-85
6-86
6-87
6-87