3Com 3CRWEASYA73 User Manual page 248

C 6: C L
HAPTER OMMAND INE
Example
Outdoor 11a Building to Building (if-wireless g)#rogue-ap authenticate
Outdoor 11a Building to Building (if-wireless g)#
rogue-ap duration
This command sets the scan duration for detecting access points.
Syntax
Default Setting
Command Mode
Command Usage
Example
Outdoor 11a Building to Building (if-wireless g)#rogue-ap duration 200
Outdoor 11a Building to Building (if-wireless g)#
Related Commands
rogue-ap interval
This command sets the interval at which to scan for access points.
I
NTERFACE
access points are allowed or are rogues. If you enable authentication, you
should also configure a RADIUS server for this access point (see "RADIUS"
on page 8).
rogue-ap duration <milliseconds>
milliseconds - The duration of the scan. (Range: 100-1000 milliseconds)
350 milliseconds
Interface Configuration (Wireless)
• During a scan, client access may be disrupted and new clients may not be
able to associate to the access point. If clients experience severe
disruption, reduce the scan duration time.
• A long scan duration time will detect more access points in the area, but
causes more disruption to client access.
rogue-ap interval (6-136)
6-136