3Com 3CRWEASYA73 User Manual page 160

C 6: C L
HAPTER OMMAND INE
snmp-server enable server
This command enables SNMP management access and also enables this device to
send SNMP traps (i.e., notifications). Use the no form to disable SNMP service and
trap messages.
Syntax
Default Setting
Command Mode
Command Usage
Example
Outdoor 11a Building to Building (config)#snmp-server enable server
Outdoor 11a Building to Building (config)#
Related Commands
snmp-server host
This command specifies the recipient of an SNMP notification. Use the no form to
remove the specified host.
Syntax
I
NTERFACE
snmp-server enable server
no snmp-server enable server
Enabled
Global Configuration
• This command enables both authentication failure notifications and
link-up-down notifications.
• The snmp-server host command specifies the host device that will
receive SNMP notifications.
snmp-server host (6-48)
snmp-server host <1 | 2 | 3 | 4> <host_ip_address | host_name>
<community-string>
no snmp-server host
• 1 - First SNMP host.
• 2 - Second SNMP host.
• 3 - Third SNMP host.
• 4 - Fourth SNMP host.
• host_ip_address - IP of the host (the targeted recipient).
6-48