3Com 3CRWEASYA73 User Manual page 236

C 6: C L
HAPTER OMMAND INE
Default Setting
Command Mode
Command Usage
Example
Outdoor 11a Building to Building (if-wireless g)#rts-threshold 256
Outdoor 11a Building to Building (if-wireless g)#
super-a
This command enables Atheros proprietary Super A performance enhancements.
Use the no form to disable this function.
Syntax
Default Setting
Command Mode
Command Usage
I
NTERFACE
2347
Interface Configuration (Wireless)
• If the threshold is set to 0, the access point always sends RTS signals. If set
to 2347, the access point never sends RTS signals. If set to any other value,
and the packet size equals or exceeds the RTS threshold, the RTS/CTS
(Request to Send / Clear to Send) mechanism will be enabled.
• The access point sends RTS frames to a receiving station to negotiate the
sending of a data frame. After receiving an RTS frame, the station sends a
CTS frame to notify the sending station that it can start sending data.
• Access points contending for the wireless medium may not be aware of
each other. The RTS/CTS mechanism can solve this "Hidden Node"
problem.
[no] super-a
Disabled
Interface Configuration (Wireless - 802.11a)
Super A enhancements include bursting, compression, and fast frames.
Maximum throughput ranges between 40 to 60 Mbps for connections to
Atheros-compatible clients.
6-124