Show Interface Ethernet; Ethernet Interface - 3Com 3CRWEASYA73 User Manual

C 6: C L
HAPTER OMMAND INE
Command Usage
Example
The following example disables the Ethernet port.
Outdoor 11a Building to Building (if-ethernet)#shutdown
Outdoor 11a Building to Building (if-ethernet)#

show interface ethernet

This command displays the status for the Ethernet interface.
Syntax
Default Setting
Command Mode
Example
Outdoor 11a Building to Building #show interface ethernet
Ethernet Interface Information
========================================
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Speed-duplex
Admin status
Operational status
========================================
Outdoor 11a Building to Building #
I
NTERFACE
This command allows you to disable the Ethernet port due to abnormal
behavior (e.g., excessive collisions), and reenable it after the problem has
been resolved. You may also want to disable the Ethernet port for security
reasons.
show interface [ethernet]

Ethernet interface

Exec
: 192.254.2.1
: 255.255.255.0
: 192.254.2.253
: 192.254.2.55
: 10.1.0.55
: 100Base-TX Half Duplex
: Up
: Up
6-110