Auto Cook Mode - Crock-Pot Smart-Set Owner's Manual

The Auto Cook Mode cooks your meal based on both temperature and time
settings; your meal is done when it has reached the safe internal temperature
and then has simmered to reach the optimal taste. The pre-set meat options and
digital thermometer ensure perfect results, regardless of the size or cut of your
meat, and the Smart-Set™ slow cooker automatically switches to the WARM
setting so that your meal is always warm and ready to serve. Use this mode
when taste is your top concern, as it was designed to produce optimal results
every time.
1. Place the stoneware into the heating base.
2. Prepare your ingredients and place them into the stoneware.
3. Plug the temperature probe cord into the temperature probe jack on the
heating base. (See Figure 4)
4. Insert the temperature probe into the thickest piece of meat or center of
dish. Attach the lid to the heating base, allowing the temperature probe
cord to set in the notch of the stoneware, under the closed lid. (See Figure 4)
NOTE: If the temperature probe cord is pulled out of the temperature probe
jack while the unit is plugged into an electrical outlet, the slow cooker will
beep and display PROB OUT until the temperature probe cord is plugged
back into the temperature probe jack.
5. Plug the heating base into a standard outlet.
6. Press the AUTO button to cycle through and select BEEF, POUL (poultry),
PRK1 (bone-in pork), PRK2 (boneless pork), CHIL (chili), or STEW.
7. Press the TEMP button to select HIGH or LOW.
8. Press the START/STOP button to start cooking. The upper display shows
the AUTO selection, the lower display shows the internal temperature of
the food, and the corresponding temperature light illuminates. The lower
display will reflect the internal temperature, as it changes.
9. When the internal temperature of the meat reaches the safe temperature,
the slow cooker beeps once, the upper display shows "SIMR," and the lower
display shows the additional cook time* (see chart on page 17) and then
starts to count down. At this point, the food is simmering until it reaches
its optimal taste.
10. When the cook time expires, the slow cooker beeps twice, and the
temperature shifts to WARM. The upper display shows WARM and the
lower display is off.

Auto Cook Mode

E7