Dual Cycle Mode With Digital Timer - Crock-Pot Smart-Set Owner's Manual

The Dual-Cycle Mode operates the same way as the Digital Timer Mode, but it
takes things one step further! This mode allows you to set your slow cooker to
cook at one temperature for a specified time and then automatically switches
over to another temperature for additional time before switching to the WARM
setting. You can customize recipes without being present, giving you greater
control over the cooking process.
1. Place the stoneware into the heating base.
2. Prepare your ingredients and place them into the stoneware.
3. Attach the lid to the heating base, and plug the heating base into a
standard outlet.
4. Press the TEMP button to select LOW or HIGH. The temperature light
that you select flashes. Refer to the "Converting Your Recipes" section for
information on temperature settings.
5. Turn the SET TIME dial to select the amount of time you want to cook at
the selected temperature. The time flashes in the upper display and the
temperature light illuminates.
6. Press the CYCLE button and the time in the upper display stops flashing
and dims and the other temperature light flashes.
7. Turn the SET TIME dial to select the amount of time you want to cook
nd
at the 2 temperature. The time flashes in the lower display and the 2
temperature light illuminates.
8. Press the START/STOP button to start cooking. The time in the lower display
stops flashing and dims, the first temperature light illuminates, the upper
display brightens and starts to countdown, and the second temperature
light goes off. When slow cooker has run for the selected time on CYCLE 1,
the slow cooker beeps once and switches to the CYCLE 2 program for the
selected time. Once CYCLE 2 has run for the selected time, the slow cooker
beeps twice and switches to the WARM setting. The slow cooker remains
on WARM until you turn the slow cooker off.
9. To change any settings after you have already pressed the START/STOP
button, you must make your new selections and press the START/STOP
button so that the slow cooker recognizes the new settings.
10. Press the START/STOP button to turn off the slow cooker, then unplug it
from the outlet.
Dual-Cycle Mode with Digital Timer
E10
nd