Digital Timer Mode - Crock-Pot Smart-Set Owner's Manual

The Digital Timer Mode allows you to set a time and temperature at which your
meal will cook, anytime from 30 minutes to 20 hours (in half-hour increments),
and follow along as the digital display counts down the remaining cook time.
When it s done cooking, the Smart-Set™ slow cooker automatically switches
to the WARM setting so that your meal stays warm until you're ready to serve
it. The Digital Timer Mode is great for easy meal planning, as it requires no
supervision and tells you exactly when your meal will be ready. It is ideal for
recipes that call for one constant temperature throughout the entire cook time.
1. Place the stoneware into the heating base.
2. Prepare your ingredients and place them into the stoneware.
3. Attach the lid to the heating base, and plug the heating base into a
standard outlet.
4. Press the TEMP button to select LOW or HIGH. The temperature light
that you select flashes. Refer to the "Converting Your Recipes" section for
information on temperature settings.
5. Turn the SET TIME dial to select the amount of time you want to cook at
the selected temperature. The temperature light illuminates and the time
flashes in the upper display.
6. Press the START/STOP button to start cooking. The amount of time that
you dialed shows in the upper display and starts counting down and the
corresponding temperature light remains illuminated. When the selected
time expires, the slow cooker beeps twice and switches to the WARM
setting. WARM shows in the upper display, the WARM light illuminates, and
the temperature light goes off.
7. Press the START/STOP button to turn off the slow cooker, then unplug it
from the outlet.

Digital Timer Mode

E9