Menu Screen Items - Icom M506 31 Instruction Manual

Menu screen items

■
The Menu screen contains the following items.
D DSC
Item Ref.
• Individual Call p. 28
• Individual ACK* 1 p. 31
• Group Call p. 33
• All Ships Call p. 35
• Distress Call p. 23
• Received Call Log p. 65
• Transmitted Call Log p. 67
D CONFIG (Configuration)
Item Ref.
• Backlight p. 93
• Display Contrast p. 93
• Key Beep p. 93
• Key Assignment p. 94
• Key Movement p. 94
• UTC Offset p. 95
* 1 Appears only after receiving a corresponding call.
* 2 Appears only when no GPS information is received.
* 3 Appears only when the optional HM-195 is connected.
* 4 Appears only when a GPS receiver compatible with NMEA 0183
(ver. 2.0 or later) or NMEA 2000 is connected.
* 5 Appears only when the voice scrambler unit is installed.
Item Ref.
• Position Request p. 37
• Position Reply* 1 p. 47
• Position Report p. 39
• Polling Request p. 41
1
• Polling Reply* p. 51
• Test Call p. 43
• Test ACK* 1 p. 45
Item Ref.
• Horn Frequency p. 95
• Inactivity Timer p. 95
• Unit ID p. 96
• COMMANDMIC SP* 3 p. 96
MENU SCREEN OPERATION
D MMSI/GPS
The transceiver shows the programmed MMSI code, GPS in-
formation* 4 , and installed option unit.
If the code is not programmed, "NO DSC MMSI" is displayed.
D DSC SET
Item Ref.
2
• Position Input* p. 22
• Individual ID p. 19
• Group ID p. 20
• Individual ACK p. 68
• Position ACK p. 68
• Test ACK p. 68
D RADIO SET
Item Ref.
• Scan Type p. 97
• Scan Timer p. 97
• Dual/Tri-Watch p. 97
• CHAN Group p. 97
• CALL CHAN p. 98
11
Item Ref.
• CH 16 Switch p. 69
• DSC Data Output p. 70
• Alarm Status p. 70
• CH 70 SQL Level p. 71
• DSC Loop Test p. 71
Item Ref.
• WX Alert p. 98
• Voice Scrambler* 5 p. 98
• Noise Cancel p. 99
• Voice Record p. 100
• FAV on MIC p. 100
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
92