Icom ID-5100A Full Manual page 229

Previous view
12
MENU SCREEN
Menu items and Default settings (Continued)
NOTE: The default settings shown in bold letters below are for the USA version.
The default settings may differ, depending on your transceiver version.
SPEECH
RX Call Sign SPEECH
RX>CS SPEECH
DIAL SPEECH
MODE SPEECH
SPEECH Language
Alphabet
SPEECH Speed
SPEECH Level
DTMF
DTMF Memory
DTMF Speed
QSO/RX Log
QSO Log
* 1
RX History Log
* 1
CSV Format
Separator/Decimal
Date
Function
Squelch/ATT Select
Squelch Delay
Fan Control
Dial Speed-UP
Auto Repeater
* 2
Remote MIC Key
During RX/Standby
During TX
Up/Down MIC Key
During RX/Standby
During TX
One-Touch PTT(Remote MIC)
PTT Lock
Busy Lockout
Time-Out Timer
Be sure to insert the SD card into the transceiver before selecting these items.
* 1
Appears only in the Korean and U.S.A. version transceivers.
* 2
Sets the Speech functions.
OFF, ON (Kerchunk) or ON (All)
OFF or ON
OFF or ON
OFF or ON
English or Japanese
Normal or Phonetic Code
Slow or Fast
0~7~9
Sets the DTMF Memory functions.
d0:~d9:, dA:~dD:, d*: or d#:
100ms, 200ms, 300ms or 500ms
Sets the QSO/RX History Log options.
OFF or ON
OFF or ON
Sep [,] Dec [.], Sep [;] Dec [.] or
Sep [;] Dec [,]
yyyy/mm/dd, mm/dd/yyyy or
dd/mm/yyyy
Sets various function's options.
OFF, S-Meter Squelch, ATT
Short, Long
Slow, Mid, Fast or Auto
OFF or ON
OFF or ON (DUP), ON (DUP,TONE) Turns the Auto Repeater function ON or OFF.
[F-1]:BAND/BANK [F-2]:Monitor
[F-1]:T-CALL [F-2]:---
[UP]:UP [DN]:DOWN
[UP]:--- [DN]:---
OFF or ON
OFF or ON
OFF or ON
OFF, 1min, 3min, 5min, 10min,
15min or 30min
12-7
Selects the RX call sign speech function option while
ON, or turn it OFF.
Turns the RX>CS Speech function ON or OFF.
Turn the Dial Speech function ON or OFF.
Turn the Operating Mode Speech function ON or
OFF.
Selects either English or Japanese as the desired
speech language.
Selects the alphabet character announcement type.
Selects Slow or Fast speech speed
Sets the volume level for the voice synthesizer.
Shows a list of the DTMF memory channels. The
DTMF memory can store up to 24-digit DTMF code.
Selects the DTMF transmit speed.
Selects to make a communication log on the SD
card, or not.
Selects to make a DV mode's receive history log on
the SD card, or not.
Selects the separator and the decimal character for
the CSV format.
Selects the date format.
Selects to use the S-Meter Squelch or the Attenuator
function for the [SQL] control.
Selects to shorten or lengthen the time until the
squelch opens.
Selects the cooling fan control condition.
Turns the dial speed acceleration ON or OFF.
Selects the key function for [F-1] or [F-2] on the sup-
plied remote-control microphone.
Selects the key function to be used while receiving or
in the standby mode.
Selects the key function to be used while transmit-
ting.
Selects the key function for [UP] or [DN] on the op-
tional hand microphone.
Selects the key function to be used while receiving or
in the standby mode.
Selects the key function to be used while transmit-
ting.
Turns the One-Touch PTT function ON or OFF.
Turns the PTT Lock function ON or OFF.
Turns the Busy Lockout function ON or OFF.
Selects the Time-Out Timer time options.