D Recording An Auto Reply Voice Announcement - Icom ID-5100A Full Manual

Previous view
7
D-STAR OPERATION <ADVANCED>
Automatic Reply function (Continued)

D Recording an Auto Reply voice announcement

The Auto Reply voice announcement can be recorded
and saved on an SD card to reply to the call with your
voice.
NOTE: Be sure to insert an SD card to the [SD] slot
of the transceiver before starting to record a voice
announcement.
Touch [MENU].
q
Touch "DV Auto Reply."
w
(Voice Memo > DV Auto Reply)
• If the item is not displayed, touch [∫] or [√] one or more
times to select another page.
Touch [ ].
e
• Starts recording.
Recording
• Touch [] to stop recording.
• Touch [≈] to start the playback.
While playing
Playing
time
• Maximum record time is 10 second
• Hold the microphone 5 to 10 cm (2 to 4 inches) from your
mouth, then speak at a normal voice level.
• Only one announcement can be recorded. The current
contents will be overwritten if you record again.
Recording
time
• Touch [MIC GAIN] to open the "MIC GAIN" setting win-
dow.
Audio level is
displayed
Touch [MENU].
r
• Closes the Menu screen.
You can delete the recorded audio.
On the "DV AUTO REPLY" screen, touch [QUICK],
➥
and then touch "Clear."
You can record your voice with the optional VS-3
®
.
etooth
headset
On the "DV AUTO REPLY" screen, touch [MIC SE-
➥
LECT], and then touch "Bluetooth MIC."
7-13
Adjust the Mic gain so
that the REC Level does
not reach to this range
Blu-