Writing Into A Memory Channel; D Writing Into The Selected Channel; D Writing Into A Blank Channel - Icom ID-5100A Full Manual

Previous view
3
MEMORY OPERATION

Writing into a Memory channel

After setting a frequency in the VFO mode, you can
write it into a Memory channel.
When writing into a channel, you can select the des-
tination channel between your desired channel or the
lowest blank channel.
Memory channels 002 to 999 are blank as the default.

D Writing into the selected channel

Example: Writing 146.030 MHz into Memory channel 18.
Touch the Memory channel number.
q
• Opens the Mode setting window.
Touch [VFO].
w
• Selects the VFO mode.
Rotate [DIAL] to set 146.030 MHz.
e
Touch the Function group icon one or more times.
r
• Selects the F-1 menu.
Touch [MW].
t
Touch [Write to New CH].
y
• Opens the "WRITE" screen.
Touch [CH SEL].
u
Touch "018."
i
NOTE: If you select a pre-entered channel, the
previous channel content will be overwritten.
• Call channels are also selectable.
Touch [WRITE].
o
!0 Touch [YES].
• Beeps sound.
• Writes into the selected Memory channel, and returns to
the VFO mode.

D Writing into a blank channel

Example: Writing 146.030 MHz into a blank channel.
Touch the Memory channel number.
q
• Opens the Mode setting window.
Touch [VFO] to select the VFO mode.
w
Rotate [DIAL] to set 146.030 MHz.
e
Touch the Function group icon one or more times.
r
• Selects the F-1 menu.
Touch [MW] for 1 second.
t
• Writes into the smallest blank, and returns to the VFO
mode.
3-6