Recording A Qso Audio; D To Starting To Record; D To Stop Recording - Icom ID-5100A Full Manual

Previous view
10
VOICE MEMORY

Recording a QSO audio

Recording a QSO audio using the MAIN band.
NOTE:
Be sure to insert an SD card into the transceiver be-
fore recording the audio.

D To starting to record

Touch [QUICK].
q
Touch "<<REC Start>>."
w
• Enters to the Recording Standby mode.
Standby mode
Starts to record when the squelch opens.
Appears
Recording
• Recording pauses while no signal is received, and re-
sumes when a signal is received again.
• Recording continues until you manually stop recording,
or the card becomes full.
• If the recording file's content reaches 2GB, the transceiver
automatically creates a new file, and continues recording.
For your reference:
When the PTT Automatic Recording function is set to
ON, the recording automatically starts when "<<REC
Start>>" is touched. (In this case, recording continues
even while no signal is received.)
See page 12-17 for the setting details.
Appears
Blinks

D To stop recording

Touch [QUICK].
q
Touch "<<REC Stop>>."
w
• The transceiver displays "Recording stopped," and auto-
matically exits the Quick Menu screen.
For your reference:
When touching either the "
recording?" dialog box appears. Touching [YES] also
stops the recording.
NOTE:
Once the recording has started, it will continue, even
if the transceiver is rebooted.
10-2
" or " " icons, the "Stop