D Using The "Local Cq" (Local Area Call) - Icom ID-5100A Full Manual

Previous view
6
D-STAR OPERATION <BASIC>
"TO" (Destination) setting (Continued)

D Using the "Local CQ" (Local Area call)

When "Local CQ" is selected in the "TO SELECT"
screen, "CQCQCQ" is set in "TO."
Example: Making a Local area call by accessing the
"Hirano" repeater.
Touch [DR].
q
Check whether or not "TO" is selected.
w
• If "TO" is not selected, touch the "TO" field.
Touch the "TO" field.
e
• Opens the "TO SELECT" screen.
Touch "Local CQ."
r
• The transceiver returns to the DR screen, and "CQC-
QCQ" is displayed in "TO."
D Using the "Gateway CQ" (Gateway call)
When "Gateway CQ" is selected in the "TO SELECT"
screen, you can select the repeater to make a gateway
call on the repeater list.
Example: Making a gateway CQ call to the "Hamacho"
(Japan) repeater from the "Hirano" repeater.
Touch [DR].
q
Check whether or not "TO" is selected.
w
• If "TO" is not selected, touch the "TO" field.
Touch the "TO" field.
e
• Opens the "TO SELECT" screen.
Touch "Gateway CQ."
r
• Opens the "REPEATER GROUP" screen.
Touch the repeater group where your destination re-
t
peater is listed. (Example: "11: Japan")
Touch the destination repeater.
y
(Example: "Hamacho")
• The transceiver returns to the DR screen, and "Hama-
cho" is displayed in "TO."
6-24