Table of Contents
Advertisement
■ Making a Local CQ call
You can make a Local CQ call when "Local CQ" is set to "TO" (Destination).
What is a Local CQ Call?
To call a CQ through only your local area (access) repeater.
Step 1: Set "FROM" (Access repeater).
1.
Push D-pad() to select "FROM," and then push [ENT].
2.
Select "Repeater List."
3.
Select the repeater group where your access repeater is listed.
4.
Select your access repeater.
• Returns to the DR screen, and the selected repeater name is displayed in "FROM."
Step 2: Set "TO" (Destination).
1.
Push D-pad() to select "TO," and then push [ENT].
2.
Select "Local CQ."
• Returns to the DR screen, and "CQCQCQ" is displayed in "TO."
Step 3: Hold down [PTT] to transmit.
1.
Hold down [PTT] to transmit.
• The TX/RX indicator lights red while transmitting.
2.
Release [PTT] to receive.
TIP: The Local CQ call is used to call anyone, but you can call a specific station by
simply saying their call sign.
D-STAR OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
54
Advertisement
Table of Contents
