Setting The Voltage For The Secondary Transfer - Kyocera TASKalfa 6501i Service Manual

Item No.
U106

Setting the voltage for the secondary transfer

Description
Sets the control voltage for the secondary transfer depending on each paper type.
Purpose
To change the setting when any density problems, such as too dark or light, occur.
Method
1. Press the start key.
2. Select the item to be set.
Light/Normal1
Normal2/3
Heavy1-3
Heavy4/5
OHP
Bias
Setting: [Light/Normal1]
1. Select the item to be set.
Display
1st
2nd
2. Select the paper width to be set.
3. Change the value using the +/- or numeric keys.
[1st]
Display
Width=105
Width=210
Width=297
Display
Control voltage for the transfer bias on paper with thickness
52 g/m
Control voltage for the transfer bias on paper with thickness
76 g/m
Control voltage for the transfer bias on paper with thickness
106 g/m
Control voltage for the transfer bias on paper with thickness
221 g/m
Control voltage for the transfer bias for transparencies
Transfer bias value
Control voltage for the transfer bias for the first side (full speed)
Control voltage for the transfer bias for the second side (full speed)
Description
105 mm wide
210 mm wide
297 mm wide
Description
Description
to 64 g/m and 65 g/m
2 2
to 105 g/m
2 2
to 220 g/m
2 2
to 300 g/m
2 2
Description
Setting
range
0 to 255 152
0 to 255 147
0 to 255 141
1-3-71
to 75 g/m
2 2
Initial setting
65ppm 80ppm
162
159
151
2N8/2N7