The Stacker/Stapler, Optional Inserter And Optional Integrated Punch Unit - Canon imagePRESS C7011VPS series Operation Manual

The stacker/stapler, optional inserter and optional
integrated punch unit
Introduction
With the Finisher-AJ1 and Saddle Finisher-AJ2 you can stack and staple prints. With the Saddle
Finisher-AJ2 you can also saddle stitch booklets. With the optional Puncher Unit-BB1 you can
punch holes in your prints.
IMPORTANT
You cannot attach the optional Finisher-AJ1 and Saddle Finisher-AJ2 to the machine at the same
time.
External view
8
7
6
5
4
[8] The Saddle Finisher-AJ2 with inserter (left-hand side) and Finisher-AJ1 (right-hand side)
Main parts
1
2
3
4
5
6

The stacker/stapler, optional inserter and optional integrated punch unit

2
3
Component
Main power switch
Top cover
Front cover
Booklet tray
Saddle Finisher-AJ2 only
Auxiliary booklet tray
Saddle Finisher-AJ2 only
Lower tray
(I side)
( side)
7
6
Function
Press to the "I" side to turn on the stacker/
stapler.
Open the top cover to clear a paper jam
inside the unit.
Open the front cover to replace the staple
cartridge, remove jammed paper, or clear
a staple jam in the stapler unit and saddle
stitcher unit.
Receives saddle stitched booklets.
Pull out the auxiliary booklet tray to re-
ceive large size booklets.
Receives finished documents.
1
2
3
Chapter 2 - Main parts
4
33