Wireless Setting Program - Xerox WorkCentre 3215NI User Manual

If you use Windows Vista, select Start > All programs > Accessories > Run, and type X:\Setup.exe.
If the AutoPlay window appears in Windows Vista, select Run Setup.exe in Install or run program
field, and select Continue in the User Account Control window.
3. Select Install Software. A Printer Connection Type window displays.
Select Wireless network connection.
4.
5. When asked if you are setting up the printer for the first time, select Yes, I will set up my printer's
wireless network and select Next.
Select your wireless network from the list and select Next.
6.
7. Select Advanced Settings to set the following:
8. Select Next.
9. Follow the wizard instruction to select and install the printer. Select your connection type and
select Next. The Select Software to Install window displays.
10. After the installation is finished, the Setup Complete page will display. Select Print a test page
and select Finish.
If your printer is connected to the network, a Test Print page prints. If the Test Print operation is
successful, refer to the
Troubleshooting chapter of this guide.

Wireless Setting Program

When installing the WorkCentre 3215NI and WorkCentre 3225DNI, you can use the Xerox Easy
Wireless Setup program that was automatically installed with the printer driver to configure the
wireless settings.
To open the program:
1. Select Start > Programs or All Programs > Xerox Printers > [Xerox WorkCentre 3215 or 3225]>
Xerox Easy Wireless Setup.
2. Connect the machine to your computer using the USB cable.
Note: During installation, the printer needs to be temporarily connected using the USB cable.
Note: You cannot use your printer on a wired and wireless network at the same time. If your
printer is currently connected to the network with an Ethernet cable, unplug the cable.
3. Select Next.
4. Once the machine is connected to the computer with the USB cable, the program searches for
WLAN data.
5. When the search is complete, the Select Wireless Network window displays. Select your network
from the list.
6. Select Advanced Setting if you want to enter the following information:
7. Select Next. The Wireless Network Security screen displays.
8. Enter your Network Password and select Next.
9. When the Wireless Network Setup Complete page displays, select Finish.
Print chapter of this guide. If the print operation failed, refer to the
Xerox® WorkCentre® 3215/3225
User Guide
Windows Drivers
55