Network Installation: Unix; Hp-Ux Client (Version 10.X) - Xerox WorkCentre 3215NI User Manual

Network Installation: Unix

Network Installation: Unix

HP-UX Client (Version 10.x)

HP-UX workstations require specific installation steps to communicate with the machine. The machine
is a BSD-style Unix printer, whereas HP-UX is a System V-style Unix.
IMPORTANT: All Unix commands are case sensitive, so enter the commands exactly as they are
written.
Information Checklist
Before starting ensure that the following items are available and/or the tasks have been performed:
• Existing operational network utilizing the TCP/IP protocol.
• Ensure that the machine is connected to the network.
• Static IP Address for the machine.
• Subnet Mask Address for the machine.
• Gateway Address for the machine.
• Host Name for the machine.
Procedure
1. Follow the steps in
Configure the Client
2. Add the machine Host Name to the etc/hosts file on the HP-UX workstation.
3. Ensure that you can ping the machine from the HP-UX workstation.
4. Use either the GUI method or the tty methods as detailed below.
GUI Method
1. Open a Command window from the desktop.
2. Enter su to access Super User mode.
3. Enter sam to start the System Administrator Manager (SAM).
4. Select the Printers and Plotters icon.
5. Select lp spooler.
6. Select Printers and Plotters.
7. Select Actions: Add Remote Printer/Plotter.
8. Enter the following information into the Add Remote Printer/Plotter form:
a. Printer Name: printer name.
Where printer name is the name of the queue being created.
b. Remote System Name: hostname.
Where hostname is the machine hostname from the /etc/hosts file.
c. Select Remote Printer is on a BSD System.
42 Xerox® WorkCentre® 3215/3225
User Guide
Configure Static IPv4 Addressing at the Machine, then return to this page.