Feature Management; Restart Device - Xerox WorkCentre 3215NI User Manual

Feature Management

The Feature Management screen allows you to control the Services, Physical Ports, PC Scan Security,
and Network Protocols that are available on the machine.
1. At your workstation, open the Web browser and enter the IP Address of the machine in the
Address Bar.
2. Press Enter.
3. Select Properties.
4. If prompted, enter the Administrator User Name (admin) and Password (1111), and select Login.
Click Properties.
5. In the Security link on the left hand side select the System Security link.
6. Select the Feature Management link in the directory tree.
7. To enable or disable a feature, select the required Enable check box or Disable link.
• For the LPR/LPD Protocol, enter the required port number. (The default is 515).
For Raw TCP/IP Printing Protocol, enter the required port number (The default is 9100).
•
8. Click Apply to save the changes.
9. Select OK.

Restart Device

The Restart Device screen allows you to reboot the machine remotely from your desktop.
Note: When the machine is restarted, the Network Controller will take some time to restart.
The network connectivity will be unavailable during this time.
1. At your workstation, open the Web browser and enter the IP Address of the machine in the
Address Bar.
2. Press Enter.
3. Select Properties.
4. If prompted, enter the Administrator User Name (admin) and Password (1111), and select Login.
Click Properties.
5. In the Security link on the left hand side, select the System Security link.
6. Select the Restart Device link in the directory tree.
7. To reboot the machine, select the required Restart Now button.
The Do you really want to restart the device screen appears. Click Yes. The machine will reboot.
8.
CentreWare Internet Services may be unavailable for several minutes while the machine reboots.
Security Settings
® ®
Xerox WorkCentre 3215/3225
User Guide
181