Fax Defaults; Configuration Report; Xerox® Centreware® Internet Services - Xerox WorkCentre 3215NI User Manual

Fax Defaults

Your machine provides you with various user-selectable options for setting up the fax system. You can
change the default settings for your preferences and needs. Receiving and Sending settings can be
customized. A password may be required to access and change the Fax Setup settings.
Fax defaults you can set include:
• Lighten/Darken
• Resolution
• Original Size
• Multi Send
• Delay Send
• Priority Send
• Send Forward
• Receive Forward
• Secure Receive
• Add Page
• Cancel Job

Configuration Report

The Configuration Report lists printer information such as default settings, installed options, network
settings including IP address, and font settings. Use the information on the configuration page to help
you configure network settings for your printer, and to view page counts and system settings.
Printing a Configuration Report
1. At the printer control panel, press the Machine Status button.
2. Press the Up/Down arrows to display Information Pages, then press OK.
3. Press the Up/Down arrows to display Configuration Page, then press OK.
4. Press OK.
Note: IPv4 and IPv6 address information is located in the Network Setup section of the
Configuration Report under TCP/IP.
®
Xerox CentreWare
® ®
Xerox CentreWare Internet Services is the administration and configuration software installed on the
embedded Web server in the printer. It allows you to configure and administer the printer from a Web
browser.
® ®
Xerox CentreWare Internet Services requires:
• A TCP/IP connection between the printer and the network in Windows, Macintosh, Unix, or Linux
environments.
• TCP/IP and HTTP enabled in the printer.
• A network-connected computer with a Web browser that supports JavaScript.
®
Internet Services
Xerox® WorkCentre® 3215/3225
User Guide
Feature Defaults
19