Verify The Ldap Settings - Xerox WorkCentre 3215NI User Manual

E-mail Setup
8. In the LDAP Server area enter the IP address or host name and Port Number of the LDAP server.
9. Select the required option for Match User's Login ID to the following LDAP attribute.
10. In the Secure LDAP Connection area, select the Enable check box to enable Secure LDAP via
SSL.
11. Enter the required information in the LDAP User Search field:
• Search Root Directory - allows you to limit the LDAP search by entering the location on
the server where the user information is stored.
• Authentication Methods - select either Anonymous or Simple to access the LDAP
server.
If you selected Simple for Authentication Methods, enter the required Login ID and Password.
You can check the Enable check box for Append Root to Base DN.
When enabled the bind will append the Root to Append string to the authenticate user login IDs.
This should be enabled whenever the Windows Login attribute is UserPrincipalName. A typical
Root to Append may look like "@yourcompany.com."
Note Many Unix/Linux LDAP servers require this attribute to be set and it is used frequently when
Authentication Methods is set to Simple.
12. Enter the required option for Maximum Number of Search Results. For Maximum Number of
Search Results, enter amount between 0, 5-300. This is the maximum number of addresses that
will appear which match the search criteria selected by the user. Set the search results to one less
than the server will allow. For example, if the LDAP server limit is 75, set the search results to 74 or
less. A zero value will attempt to return all searches.
13. For Search Timeout, enter the required setting for the search timeout (0, 5-100 seconds).
14. Select LDAP Referral if this option is required.
15. The Search By option offers 4 ways to search the address list depending on the name syntax used
in your environment. Select one of the following search types:
• Common Name - names are listed by the Common Name LDAP attribute. Common
Name is the default option.
• E-mail Address - names are listed by e-mail address.
• Surname/Given name - names are listed by Surname (Last Name) then Given Name
(First Name).
• Custom - Select Custom to enter the required search information in the Custom Search
box.
The Search Name Order option will help control the returns by allowing the LDAP query to be on
Common Name or Surname.
16. Select the LDAP Configuration Test button to test your LDAP settings.
17. Select Apply to save the changes.
18. Select OK when the acknowledgement message displays.

Verify the LDAP Settings

1. At the machine, press the E-mail button on the control panel.
2. If Authentication is enabled, enter your Login ID and Password (if required).
3. The Enter From Address screen displays.
80 Xerox® WorkCentre® 3215/3225
User Guide