Opening The Troubleshooting Guide; Changing The Status Monitor Program Setting - Xerox Phaser 3200MFP User Manual

Opening the Troubleshooting Guide

Changing the Status Monitor Program Setting

Xerox Phaser 3200MFP
Double click the Status monitor icon on the Windows task bar.
Double click this icon.
Or, From the Start menu, select Programs or All Programs
3200MFP Troubleshooting guide.
The following window opens when you click the Status monitor icon on the
Windows task bar and select Option.
• Display when job is finished for network printer shows the Status
monitor balloon when your job is complete.
• Display when error occurs during printing the Status monitor balloon
appears when an error occurs while printing.
• Schedule an automatic status checking every allows the computer to
update the printer status regularly. Setting the value close to 1 second
causes the computer to check the printer status more frequently, thereby
allowing a faster response to any printer error.
NOTE:
When the Status monitor balloon appears to indicate an error, you
can cancel the current print job or see the corresponding solution. If you
select Cancel Printing, turn the printer off and then click OK. It may take
several minutes. Note that this will lose data which is being sent to the printer
via network.
6 Printing
Xerox Phaser
6-31