S U N GEAR DRIVE SHELL
Figure 7A 5-70 Removing Sun Gear Drive Shell Rear
4. R em ove sun gear to drive shell front retaining ring.
5. If bushing is to be replaced, refer to Figure 7A 5-71).
Rear Steel Thrust W asher
Inspection
Check gear and sun gear shell for damage or wear.
Reassem bly
1. Install new sun gear to drive shell front retaining
ring.
Figure 7A 5-69 Planetary Gear Train-Exploded View
SUN GEAR
R E T A I N I N G
RI N G
ring.
installation.
A U TO M A TIC TR A N SM IS S IO N 7 A 5-15
SUN GE AR DRIVE SHELL
FLAT THRUST W A SH E R
Figure 7A5-71 Removing Sun Gear to Drive Shell
2. Install sun gear assem bly into drive shell.
3. Install sun gear to drive shell flat steel thrust washer.
4. Install new sun gear to sun gear drive shell retaining
D o not stress front and rear retaining rings at
SUN GE AR